Dettol Protect 24 Multi Surface Wipes 50s
Suitable for use on hard, non-porous surfaces around house:
How to use
- Pull back resealable cover, pull out the wipe.
- Reseal after each usage & store cover facing down to avoid drying out.
- Wipe surface for a more hygienic clean and then dispose of wipe in your normal home bin.
- † For 24hr Bacteria/Virus Disinfection: Pre-clean the surface before using the wipe. One wipe should be used to wet an area of 44cm x 44cm. Allow the surface to remain wet for at least 5 minutes. Let air dry.
- Test on an inconspicuous area before using to ensure no damage is caused to the surface.
Harmful to aquatic life with long lasting effects.
Dispose of contents/container in accordance with local and national regulations.
If medical advice is needed, have product container or label at hand.
Not for personal hygiene use.
Keep out of reach of children.
Do not flush down the toilet.
Wash your hands thoroughly after handling.
- Antibacterial Action
- Benzalkonium Chloride, Didecyldimonium Chloride
- Decylamine Oxide, Lauramine Oxide
- Water, Polymer, Disodium EDTA, Citric Acid, Antifoam Emulsion, Denatured Ethanol, Tristyrylphenol Ethoxylates
- Free from
- Bleach**, Dyes
Contains: Per 100g contains 0.194g Benzalkonium Chloride and 0.194g Didecyldimonium chloride <5% Non-ionic surfactant, <5% Amphoteric surfactant, Methylisothiazolinone, Benzisothiazolinone, Iodopropynyl butylcarbamate, Disinfectant, Parfum
Dettol Protect 24 can be used on a variety of worksurfaces as highlighted in the suitable for use section above. For more detail, please refer to the safety information above or on the product label.
Yes, formulated with innovative technology, it keeps killing germs* on surfaces for up to 24 hours† even after they are touched multiple times.
It leaves behind no sticky residue whilst also killing germs* touch after touch.
Not only does it kill germs* for up to 24 hours†, it’s also free from bleach and dyes.
*Disinfection on surfaces. Bacteria & Enveloped viruses, for up to 24 hours†
**No intentionally added bleach
† For 24hr Bacteria/Virus Disinfection: Pre-clean the surface before using the wipe. One wipe should be used to wet an area of 44cm x 44cm. Allow the surface to remain wet for at least 5 minutes. Let air dry.
Use disinfectants safely. Always read the label and product information before use.